Siemens iQ300 SN73HX42VG User Manual

Cleaning and servicing en
39
Action Benefit
If the appliance
is not going to
be used for a
while, leave the
door slightly ajar.
This will prevent
unpleasant
odours.
17.4 Machine Care
Deposits, e.g. from remnants of food
and limescale, can cause your appli-
ance to malfunction. To avoid such
faults and reduce odours, we recom-
mend cleaning your appliance at reg-
ular intervals.
Machine Care combined with ma-
chine care products and machine
cleaners is the right programme for
the care of your appliance.
Tip:You can get our tested and ap-
proved Dishwasher Care and Ma-
chine Cleaner for Dishwashers online
at https://www.siemens-home.bsh-
group.com/store or from customer
service.
Machine Care is a programme which
removes various deposits in one
washing cycle. Cleaning takes place
in two phases:
Phase Removal of Detergent Placement
1 Grease and limes-
cale
Liquid machine care
product or machine
descaler in powder
form.
Appliance interior, e.g.
bottle hung in the cut-
lery basket or powder
in the interior.
2 Food remnants and
deposits
Machine cleaner Detergent dispenser
To ensure optimum cleaning perform-
ance, the programme doses the de-
tergents independently of each an-
other during the relevant cleaning
phase. Correct placement of the de-
tergents is necessary here.
Run Machine Care without tableware
if the indicator for Machine Care
lights up on the control panel or if ad-
vised to do so by the display. The in-
dicator will go out after you have run
Machine Care. If your appliance does
not have a reminder function, we re-
commend performing Machine Care
every 2months.
Running Machine Care
Notes
¡ Run the Machine Care programme
without any tableware in the dish-
washer.
¡ Only use machine care products
and machine cleaners specially
designed for dishwashers.
¡ Make sure that there are no alu-
minium parts, e.g. extractor hood
grease filters or aluminium pans, in
the interior of the appliance.
¡ If you have not run Machine Care
after 3 washing cycles, the indic-
ator for Machine Care will go out
automatically.
¡ For optimum cleaning perform-
ance, ensure the correct place-
ment of cleaners.

Siemens iQ300 SN73HX42VG Specifications

General

Door color	Not applicable
Cord length	1.75 m
Control type	Buttons
Product size	Full size (60 cm)
Inlet hose length	1.65 m
Custom panel-ready	Yes
Outlet hose length	1.9 m
Appliance placement	Fully built-in
Control panel color	Black, Stainless steel
Current	10 A
Connected load	2400 W
AC input voltage	220-240 V
AC input frequency	50-60 Hz
Energy efficiency scale	A to G
Water consumption per cycle	9.5 L
Energy consumption per cycle	0.94 kWh
Cycle time	225 min
Noise level	46 dB
Drying system	Heat exchanger
Delay start (max)	24 h
Overflow protection	-
Dishwashing programs	60min 65°C, Auto 45-65°C, Eco 50°C, Favorite, Intensive 70°C, Quick
Number of place settings	13 place settings
Number of washing programs	6
Package weight	39000 g
Apps supported	Siemens Home Connect
Feet adjustment	60 mm
Automatic door opening	No

Weight and Dimensions

Depth	550 mm
Width	598 mm
Height	815 mm
Weight	36900 g
Depth with door open	1150 mm
Installation compartment depth	500 mm
Installation compartment width	600 mm
Installation compartment height (max)	875 mm