4 Installation and Commissioning
House Control and Weather Sensors - LOGO! Set 11
Entry ID: 68585346, V2.1, 09/2018
Siemens AG 2018 All rights reserved
Click on "Open the project
view” to open it.
In the project tree under
"KTP700 [KTP700 Basic PN]",
go to "HMI alarms” and select it
with a double click.
Navigate to the "Analog
alarms” tab. The following
options are provided:
1. "Trigger tag” allows you to
specify which tag to use for
monitoring the threshold
(here for wind).
2. Enter the limit value in
"Limit” to define when a
specific warning message
is displayed.
To Next Page
Loading...
