Siemens LOGO! 24L - Page 125

117
LOGO! Manual
A5E00067781 01
Par parameter setting
The Gain and Offset parameters are used to adapt the
sensors used to the relevant application.
Parameter assignment
B03:Par
SW =+00000
SW =+00000
 =0050+
Gain in %
Degree of protection
On threshold

Off threshold
Press key
Offset
SW=+00000
SW=+00000
 =0050+
 =+200

Display in PARAM mode (example):
B02:Par
SW =+400
SW =+200
Ax =+20
LOGO! Functions