Siemens LOGO! 24L - Deleting a Program

LOGO! Manual
A5E00067781 01
58
3.6.9 Deleting a Program
To delete a program, proceed as follows:
1. Switch LOGO! to programming mode:
, and OK at the same time
>Program..
PC/Card..
Start
2. Move the ’>’ with the keys or to ’Program..’ and
press OK
>Edit Prg
Clear Prg
Set Clock
LOGO! switches to the programming
menu.
3. Move the ’>’ to ”Clear Prg”:
or
4. Accept ’Clear Prg’:
OK
Clear Prg
>No
Yes
To prevent you from inadvertently delet-
ing the program, we have included an
additional query.
If you do not want to delete the program, leave the ’>’ on
’No’ and press OK.
If you are sure that you want to delete the program stored
in LOGO!, proceed as follows:
5. Move the ’>’ to Yes:
or
6. Press OK. LOGO! deletes the program.
Pro
g
rammin
g
LOGO!