Siemens LOGO! 24L - Abbreviations

LOGO! Manual
A5E00067781 01
220
Abbreviations
B01 Block number B01
B11 LOGO! device designation: ASi bus connection
BF Basic functions
BN Block number
C LOGO! device designation: integrated clock
Cnt Count = input for counter
Co Connector
Dir Direction (e.g. for counter)
En Enable (e.g. for switching on the clock pulse
generator)
L LOGO! device designation: long variant
No Cams (time switch parameters)
o LOGO! device designation: without display
Par Parameter
R Reset
R LOGO! device designation: relay outputs
S Set (e.g. setting the latching relay)
SF Special functions
T Time (parameter)
Trg Trigger (parameter)