Siemens milltronics - Connection of motor

7ML19985FF01 Milltronics MLC Belt Scale – INSTRUCTION MANUAL Page 11
Dimensions
Notes:
• For dimension values see next page.
* For pan supported belts, the pan should be cut out to allow the MLC and at least
two (preferably four) other idlers to be installed.
Installation
Plan View
Front View
idler diameter C
location of removed idler
MLC Belt Scale
20.6mm (0.812
")
E
4 x dia.
11mm (0.44
")
64mm (2.5
")
D
*
(see Note below)
A
B