The battery Preparation for use and operation
A26391-K84-Z100-1-7619
21
Connecting the AC adapter
!
The supplied power cord conforms to the requirements of the country in which you
purchased your notebook. Make sure that the power cable is approved for use in the country
in which you intend to use it.
Keep other objects 100 mm clear of the notebook. Do not cover the ventilation slots in the
notebook.
²²
Switch off the notebook.
²²
Place the notebook on a level, stable surface.
²²
Deinstall the battery from the left slot and install it in the right slot (see "Removing and installing
drives and batteries").
²²
Place the AC adapter in the left-hand slot so that the contacts enter first. The connector for the AC
adapter power cable must face outwards.
²²
Push the AC adapter into the slot until you feel it locking into place.
1
2
²²
Connect the power cable to the AC IN connector on the notebook (1).
²²
Plug the power cable into the power outlet (2). The battery charges.
To Next Page
Loading...
