Siemens FUJITSU AMILO Li Series User Manual (English)

Questions and Answers:

C
chaseryanJul 27, 2025
Why is my external monitor blank when connected to my Siemens FUJITSU AMILO Li?
- S
  Steven BowenJul 27, 2025
  If the external monitor remains blank, ensure that it is switched on and press any key to continue if power saving has been activated. Adjust the brightness of the monitor. Check that the correct screen output is selected by pressing Fn + F10. Also, verify that the monitor's power and data cables are properly connected to both the monitor and the laptop. If any cables were loose, switch off the external monitor and the laptop, then switch them back on after securing the connections.
M
Mrs. Barbara CarlsonAug 1, 2025
What to do if my Siemens FUJITSU AMILO Li stops working?
- T
  Tracy GrantAug 1, 2025
  If your Siemens Laptop stops working, there might be several reasons. It could be in energy-saving mode, so try leaving that mode. An application might have caused the malfunction, so close the application or restart the laptop. Alternatively, the battery might be dead; in that case, charge the battery, install a charged battery, or connect the mains adapter.
N
nmurphyAug 5, 2025
How to fix a blank or unstable image on an external monitor connected to a Siemens FUJITSU AMILO Li?
- L
  Louis NelsonAug 5, 2025
  If the external monitor shows a blank or unstable image, the wrong monitor may have been selected, or the screen resolution may be incorrect. First, terminate the application program in Windows by pressing Alt + F4. If the problem continues, switch to the notebook's internal LCD screen using Fn + F10. To set the screen resolution, go to Startsymbol – (Settings) – Control Panel – Appearance and Personalization – Personalization, and adjust the screen resolution as required. To select the monitor, right-click on the desktop, go to Personalization – Display Settings, choose monitor 1 or 2, and under Advanced Settings – Monitor, select the correct monitor.
B
Beth SandovalAug 9, 2025
What to do if the LCD screen on my Siemens FUJITSU AMILO Li Laptop remains blank?
- D
  Dakota HarrisAug 9, 2025
  If the LCD screen remains blank, try pressing any key or entering your password, as the monitor may be switched off. Also, if you have an external monitor or television set connected, press the key combination Fn + F10 to switch the screen output.
M
michaelwilsonAug 13, 2025
Why is my printer not printing from my Siemens FUJITSU AMILO Li?
- M
  Mrs. Nicole JacksonAug 13, 2025
  If the printer is not printing, ensure that the printer is switched on and online. Check that the cable connecting the laptop and the printer is properly connected. Verify that the correct printer driver is loaded.
M
Monica BarrettAug 17, 2025
How to fix a radio connection that doesn't work on my Siemens Laptop?
- J
  Jesus MeyerAug 17, 2025
  If the radio connection to a network is not working, the wireless component may be disabled. Switch the radio components on. If the wireless component is enabled but the connection still doesn't work, check whether the radio connection is switched on via the software.
S
srangelAug 21, 2025
How to improve LCD screen readability on my Siemens Laptop?
- J
  Jillian MoralesAug 22, 2025
  If the LCD screen is difficult to read due to reflected glare, turn the laptop or alter the tilt of the LCD screen.

Siemens FUJITSU AMILO Li Series Specifications

General

Display	15.4-inch TFT
Resolution	1280x800 pixels
Optical Drive	DVD±RW
Networking	Ethernet
Ports	USB 2.0, VGA, ExpressCard
Operating System	Windows Vista
Battery Life	Up to 3 hours

Summary

Innovative Technology and Information

Are You Missing Information?

Find additional information about your notebook in the 'Information sources' section.

Important Notes and Conventions

Notational Conventions

Explains symbols and text formatting used in the manual for warnings, important information, and results.

Declarations of Conformity

Details compliance with essential requirements and relevant provisions of Directive 1999/5/EC.

Information Sources

Safety Information

Details safety information and precautions, especially for devices with radio components.

Drivers and Utilities

Ports and Controls Overview

Preparation for Use and Operation

Initial Setup and Location

Guides through unpacking, checking for damage, and selecting a suitable, safe location for your notebook.

Connecting the Mains Adapter

Instructions on how to connect the mains adapter and power cable to the notebook and power outlet.

Initial Notebook Power-On

Details the initial setup process, software installation, and powering on the notebook for the first time.

Notebook Shutdown and Battery

Instructions on shutting down, closing the notebook, and initial battery charging and function.

Touchpad and Speaker Operations

Explains touchpad use, speaker functions, volume control, and wireless LAN module activation.

BIOS Setup Utility

Describes how to change notebook configuration parameters like date, time, and passwords via the BIOS utility.

Troubleshooting and Tips

General Troubleshooting Steps

Provides steps to correct faults, contact support, and notes to prepare for troubleshooting calls.

Restoring Installed Software

Information on creating backups and re-installing software if the operating system fails to start.

Common Notebook Issues

Troubleshooting for incorrect date/time, notebook stops working, blank LCD, and display issues.

Peripheral and Network Issues

Solutions for external monitor problems, printer not printing, and wireless network connection failures.

Related product manuals

Siemens SIMATIC Field PG P4

Siemens FUJITSU AMILO Li Series User Manual

Table of Contents