Preparation for u se and operation
Preparation for use and operat
ion
Please obse rve the safety information in the section "Important notes", Page 2.
You must charge the battery and install the application programmes before y ou can work with the
notebook. The Windows operating system and the drivers required are already pre-installed.
This chapter also describes the basics for operating your notebook.
Unpacking and checking yo
ur notebook
Should you discover any damage incurred during transportation, notify
your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTran sport
► Check your notebook for damage incurred during transportation.
We recommend that you keep the original packaging material.
You may need the packaging in the fu ture if you need to transport your device.
Selecting the location
Location,se
lectingthe
NotebookPoweradapte
r
Select a suitable location for th e notebook before setting it up. Consider
the following points when selecting a location:
• Never place the notebook on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause da mage due to o verheating.
• Do not place the notebook directly on your legs fo r extended periods. The
underside of the notebook heats up during normal operation. Extended contact
with the skin can become unpleasant or even result in burns.
• Place the notebook on a stable, flat, non-slip surface. Please note that
the rubber feet may mark cert ain types of surfaces.
• Keep other objects 1 00 mm away from the notebook and its mains
adapter to ensure adequate ventilation.
• Never cover the ventilation slots on the notebook or the mains adapter.
• Do not expose the notebook to extre me environmental conditions. Protect
the notebook against dust, humidity and heat.
10600900852, edition 1 English - 5
To Next Page
Loading...
Need help?
General
