Siemens Mobile 750 - Hard Disk Timeout - Hard Disk Energy Saving Function; Video Timeout - Energy Saving Functions for the Monitor; LID Switch - LID Mode; Battery Low Suspend - Suspend Mode for Low Battery Capacity

Power menu - Setting energy saving functions BIOS Setup
A26391-K84-Z100-1-7619
61
Hard Disk Timeout - Hard disk energy saving function
This field can only be changed, if the
PowerSaving
field is set to
Customize
.
1, 2, 5, 10, 20, 30 min
The hard disk drive motor is switched off after the specified time without system
activity.
Off
The PC does not switch off the hard disk drive motor.
Video timeout - Energy saving functions for the monitor
This field can only be changed, if the
PowerSaving
field is set to
Customize
.
2, 5, 10, 15, 20, 30 min
The screen goes dark after the specified time without system activity.
Off
The screen does not go dark.
LID Switch - LID mode
This field specifies which mode the device is switched into when the notebook monitor is closed.
LCD Off
The screen goes dark.
Standby Mode
The system is switched into the standby mode (see
Standby Mode
)
Suspend Mode
The system state is buffered in the DRAM memory. After folding open the monitor, the
switch-on button must be pressed to return to the state prior to closing.
Battery Low Suspend - Suspend mode for low battery
capacity
This field indicates whether a switch is to be made to suspend mode when the battery capacity is low.
Enabled
The function is enabled; the device is switched to suspend mode when the battery
capacity is low.
Disabled
The function is disabled.