Siemens Mobile 750 - Working with Floppy Disks

Preparation for use and operation Floppy disk drive
28
A26391-K84-Z100-1-7619
Working with floppy disks
!
Follow the instructions supplied by the vendor of the floppy disks.
3
2
1
5
6
4
7
1 = Insertion direction
2 = Label area
3 = Write-protect slider
4 = Hole for recognition of 1.44 Mbytes disk
5 = Eject button for inserted floppy disks
6 = Floppy disk is write protected
7 = Floppy disk is not write-protected
²²
To insert a floppy disk, push it into the drive in the insertion direction (1) until it engages. The label
should be facing upward.
²²
To remove the floppy disk, press the eject button (5).
The write-protect slider enables you to protect the data on the floppy disk from inadvertent overwriting
or deletion.
²²
To protect the data on the floppy disk from being overwritten, push the write-protect slider to
position (6). The hole is now visible.
²²
To remove write protection, push the slider to position (7). The hole is now covered.