B-6
Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618
ActionCauseMessage
$ 326 Recipe selected in the PLC is not
active. Data record transfer not
possible
Select active recipe on the OP
$ 327 Invalid recipe number in the PLC
job
$ 328 Recipe number in the PLC job
greater than 99
$ 329 Same number for destination and
source
Specify different data record numbers for
source and destination.
$ 330 Source or destination not specified Specify source and destination.
$ 331 Data record specified as source
does not exist.
$ 332 Data record number in the PLC job
greater than 99
Change PLC program.
$ 333 Data record number in PLC job in-
valid
Set up missing data record or specify another
data record in the PLC job.
$ 335 Confirmation of alarm message in-
hibit
$ 336
$ 337
$ 338
Printer cannot be addressed Check printer and connection to OP
$ 339 Communication with PLC resumed
$ 340 You cannot operate the OP with sta-
tus function running on PU
$ 401 Entered value does not match dis-
play format
$ 402 Operating error in STATUS VAR or
FORCE VAR screen;
(after pressing INS when 10th vari-
able line already assigned).
$ 403 Incorrect time input
$ 404 Incorrect date input
$ 406 Operating error in STATUS VAR or
FORCE VAR screen
Abort updating
(ESCAPE key)
$ 409 Lower limit for input ignored Enter a value greater than or equal to Var
$ 410 Upper limit for input ignored Enter a value smaller than or equal to Va r
System Messages
To Next Page
Loading...
