Basic functions
25
Step by step
Reject calls
You can reject calls which you do not wish to take. The
call is then signaled at another definable telephone
(contact your service personnel).
Prerequisite: The "Disconnect" key is configured. The
phone rings. The caller appears on the screen.
S Press the "Disconnect" key.
If a call cannot be rejected, your telephone will continue
to ring. The message "currently not possible" is display-
ed (e. g. in the case of recalls).
Turning the microphone on and off
To prevent the other party from listening in while you
consult with someone in your office, you can tempora-
rily switch off the handset microphone or the handsfree
microphone. You can also switch on the handsfree mi-
crophone to answer an announcement via the telepho-
ne speaker (speaker call, Æ page 34).
Prerequisite: A connection is set up, the microphone is
activated. The "Microphone" key is configured
S Press the "Microphone" key. The microphone is deacti-
vated.
or
R Press the illuminated "Microphone" key. The micropho-
ne is activated.
To Next Page
Loading...
