Siemens OpenStage 15 T - Account code

Programming the function keys
59
Step by step
Programming a procedure key
Numbers and functions which require further input, i.e.
which contain several operating steps, can be saved on
a key on your telephone. The relevant service personnel
must be granted appropriate authorization.
For example the function "Associated dialing"
Æ page 45 together with the required input (phone
number to be dialed) can be saved on a key.
Numbers which require further input can also be saved.
S Hold down the key shown.
Confirm the option shown.
or
N Open the Program/Service menu Æ page 18.
Select and confirm the option shown.
S Press the key shown.
Confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
j Enter procedure. Example: *67 231 123456
*67 Code for associated dial
231 Number of the phone to for which the call should be
made
12345 the number to be called.
if nec.
S Press the "Pause" key to enter pauses (a "P" appears on
the display).
Confirm the option shown.
or If you make a mistake:
Select and confirm the option shown. This deletes all
entered digits.
Confirm the option shown.
Assign telephony function
Prog. feature key
Change key
More features g
Procedure key g
save
Back
End