Siemens OpenStage 15 T - Configuring Repdial Keys

Programming the function keys
61
Step by step
Configuring repdial keys
You can also program internal and external station num-
bers on the second level. The LED function is not avai-
lable for internal station numbers on the second level.
To program the second level, you must program a "Shift"
key Æ page 56.
See also Æ page 13.
S Hold down the key shown.
Confirm the option shown.
or
N Open the Program/Service menu Æ page 18.
Select and confirm the option shown.
S Press the key shown.
Confirm the option shown.
if nec.
Select and confirm the option shown.
Confirm the option shown.
Confirm the option shown.
j Enter the station number.
If you make a mistake:
Select and confirm the option shown. This deletes all
entered digits.
Confirm the option shown.
or
Select and confirm the option shown.
Assign telephony function
Prog. feature key
Change key
+=Next level
Destinations g
Number
Back
End
Another key
You dial the saved number by pressing the key
Æ page 23.
You can also save a number during a call.