Siemens OpenStage 15 T - Making Calls Using System Speed-Dial Numbers; Dialing with Speed-Dial Keys

Step by step
Enhanced phone functions
42
Making calls using system speed-dial
numbers
Prerequisite: You know the system speed-dial num-
bers (consult your service personnel).
N Press the key shown.
Select and confirm the option shown
[1]
.
j Enter a three-digit speed-dial number.
if nec. Suffix-dialing
j If necessary, you can suffix-dial additional digits
(for example, the user’s extension) at the end of the sa-
ved station number.
If this feature is configured, a suffix is automatically di-
aled (for example, "0" for the exchange) if no entries are
made within 4 or 5 seconds.
Dialing with speed-dial keys
Prerequisite: You have configured speed-dial keys
Æ page 42.
N Press the key shown.
Select and confirm the option shown
[1]
.
) Press the key shown.
j Press the required speed-dial key.
Configure a speed-dial key
You can program the keys 0 to 9 with
ten frequently used phone numbers.
N Press the key shown.
Select and confirm the option shown
[1]
.
Confirm the option shown.
) Press the key shown.
*7=Use speed dialing?
[1] "Differing display view in a HiPath 4000 environment (not for
HiPath 500)"
*7=Use speed dialing?
*92=Change speed dial?
Modify?