Programming the function keys
57
Step by step
Overview of functions
The functions are split into the following menus:
• Destinations
• Control relays
• PIN and authorization
• Calls
• More features
Saved function LED messages
Call forwarding, Forwarding - trunk, Forward Line,
Night answer, Do not disturb, Telephone lock, Advi-
sory message, Silent, HF answerback on/off, Group
call on/off, Caller ID suppression, Call wait.term.,
Call waiting tone off, Ring Transfer, Recording, Door
opener on/off, Control relay(only for HiPath 3000),
Group ringing, Shift Key, UCD(available on/off,
Work on/off, Night answer on/off, MULAP privacy
release:
S Saved function is not activated.
R Saved function is activated.
Callback:
S You have no entry for callback.
R You have an entry for callback.
Internal number, DSS:
S Party not on a call.
R Party is on a call or has activated DND.
T Flashing quickly - I’m being called, please accept.
Flashing slowly - another party is being called and has
not yet answered.
Call key, General call key, Trunk key, MULAP Key,
Assign number:
S No call via corresponding trunk.
R Active call via the corresponding trunk.
T Flashing quickly - call on the corresponding trunk, call
pickup is possible by pressing the key.
Flashing slowly - a call is placed on hold on the relevant
trunk.
The available functions depend on your configu-
ration. If a function is missing, contact your ser-
vice personnel.
To Next Page
Loading...
