Administration
A31003-O1010-M100-3-76A9, 12/09/2007
3-114 HiPath 8000 - OpenStage Family, Administrator Manual
administration.fm
Diagnostics
3.16.6 Easy Trace Profiles
In order to simplify tracing for a specific problem, the tracing levels can be adjusted using pre-
defined settings. The Easy Trace profiles provide settings for a specific area, e. g. call connec-
tion. On pressing Submit, those pre-defined settings are sent to the phone. If desired, the set-
tings can be modified anytime using the general mask for trace configuration under
Diagnostics > Fault Trace Configuration (see Section 3.16.5, “Fault Trace Configuration”).
Special EasyTrace profiles enable setting one level for all parameters with just one click (see
Section 3.16.6.19, “Common Levels for All Parameters”).
The following sections describe the Easy Trace profiles available for the phone.
3.16.6.1 Bluetooth HeadSet
Administration via WBM
Easy Trace Profiles > Bluetooth HeadSetProfile
3.16.6.2 Call Connection
Administration via WBM
Easy Trace Profiles > Call connection
>
This Easy Trace profile contains the tracing of SIP messages. Please note that after
changing the level for the tracing of SIP messages, the phone must be rebooted.
To Next Page
Loading...
