administration.fm
A31003-O1010-M100-3-76A9, 12/09/2007
HiPath 8000 - OpenStage Family, Administrator Manual
3-43
Administration
Features - Configuration
3.5.2.2 Pickup alert (V1R3.x only)
If desired, an incoming call for the pickup group can be indicated acoustically.
The Group pickup tone allowed parameter activates or deactivates the generation of an alert
tone for incoming pickup group calls. By default, it is set to „Yes“. If this is activated, Group pick-
up as ringer determines whether the current ringtone or an alert beep is used. The default is
„Yes“.
Administration via Local Phone
3.5.3 Call Transfer
3.5.3.1 Transfer on Ring
If this function is active, a call can be transferred after the user has dialled the third participant’s
number, but before the third party has answered the call. This feature is enabled or disabled in
the User menu. The default is „Yes“.
Administration via WBM
(User) Configuration > Outgoing calls
Administration via Local Phone
|
--- Administration
|
--- System
|
--- Features
|
--- Configuration
|
--- Audio
|--- Group pickup tone allowed
|
--- Group pickup as ringer
|
--- User
|
--- Configuration
|
--- Outgoing calls
|
--- Transfer on ring
To Next Page
Loading...
