EasyManua.ls Logo

Siemens OpenStage 40 HFA HiPath 4000 - Troubleshooting; Caring for your telephone

Siemens OpenStage 40 HFA HiPath 4000
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fixing Problems
115
Step by step
Troubleshooting
Pressed key does not respond:
Check if the key is stuck.
Telephone does not ring:
Check whether the "Do not disturb" function is activated
on your telephone Æ page 82. If so, deactivate it.
You cannot dial an external number:
Check whether your telephone is locked.
If the phone is locked, enter your PIN to unlock it
Æ page 81.
The displayed time is incorrect:
The time is corrected automatically over night after 24
hours at the latest.
To correct any other problems:
First contact the relevant service personnel. If the ser-
vice personnel are unable to correct the problem, con-
tact Customer Service.
Caring for your telephone
Never allow the telephone to come into contact
with coloring, oily or aggressive agents.
Always use a damp or antistatic cloth to clean the
telephone. Never use a dry cloth.
If the telephone is very dirty, clean it with a diluted
neutral cleaner containing surfactants, such as a
dish detergent. Afterwards remove all traces of the
cleaner with a damp cloth (using water only).
Never use cleaning fluids containing alcohol or plas-
tic-damaging detergents to clean the telephone.
The use of scouring agents is also forbidden.

Table of Contents

Related product manuals