Step by step
Making Calls – Convenience Functions
62
System-wide speaker call
You can place a speaker call from your phone to any in-
ternal party with a telephone equipped with speaker-
phone mode or a loudspeaker.
Speaker call to a variable destination
Prerequisite: The "Speaker call-one-way" sensor key is
programmed.
^ Lift the handset.
or
n Press the key and enter speakerphone mode.
j Enter the system code for "Speaker call-one-way" (con-
tact the relevant service personnel if necessary).
or
S Press the "Spkr. 1-way" programmable sensor key.
j Enter the internal number of the party.
A connection is immediately established to this destina-
tion station’s loudspeaker if
• the station is not busy
• the handset has not been lifted
• "Speaker call protect" is not activated
Z The caller hears a confirmation tone when the connec-
tion is established and they are free to start speaking.
^ The called party can accept the connection by lifting the
handset.
n or S If the called party presses the speaker key or the line
key (if configured), the connection is lost.
Enter code!
The same number of speaker calls and normal
connections is possible.
To Next Page
Loading...
