Siemens OpenStage15 - Making Anonymous Calls

OpenScape Voice functions
129
Step by step
Making anonymous calls
Your service personnel decides whether or not your call-
er ID (name and phone number) is displayed on a called
party’s station. Anonymous calling is when your data is
not transmitted. The settings configured can be deacti-
vated, however, for specific calls.
Deactivating
If your service personnel permanently activated anony-
mous calling for your phone, you can deactivate this
setting as follows:
^ Lift the handset.
j Enter the code (see the table of codes Æ page 143) to
transmit the caller information.
Z You hear a confirmation tone.
Activating
If your service personnel activated caller ID transmis-
sion for your phone, you can deactivate this setting as
follows:
^ Lift the handset.
j Enter the code (see the table of codes Æ page 143) to
suppress the caller ID.
Z Wait until you hear the confirmation tone.
Caller ID transfer is suppressed. "Private/Anonymous"
appears on the called party’s display instead of the call-
er ID.
• If your caller ID is transmitted: your caller ID is
displayed.
• If your caller ID is suppressed: "unknown" is
displayed.