Enhanced phone functions
71
Step by step
Select and confirm the option shown.
j Enter and confirm the phone number to which the sta-
tion should be deflected.
or Deflecting to a DSS number
A call can be deflected to a direct station selection
(DSS) subscriber using the DSS key, if the key is config-
ured and the deflect function is activated by your ser-
vice personnel Æ page 107.
Information only, as set by service personnel: Yes or No.
Rejecting a call
You can reject an incoming call.
Prerequisite: An incoming call is displayed or signaled.
Select and confirm the option shown.
The caller hears a busy signal.
Default destination =
f
Entering a destination phone number is not man-
datory when call deflection is active. If you want
to deflect an incoming call, you are prompted to
enter a destination phone number if there is
none stored.
Deflect to DSS = Yes m
Reject? f
If the rejected caller’s phone number is transmit-
ted, it is saved in the call list. You can then call
this party back at a later time.
To Next Page
Loading...
