Siemens OpenStage15 - Placing a Call on Hold

Step by step
Enhanced phone functions
74
Placing a call on hold
You can use this function to place an ongoing call on
hold, for instance, to prevent the other party overhear-
ing a conversation with a colleague in the same room.
Prerequisite: You are conducting a call.
Select and confirm the option shown in the connec-
tions’s context menu.
or
S Press the "Hold" key. The key lights up. (The "Hold" sen-
sor key must be configured Æ page 61.)
Retrieving a held call
Select and confirm the option shown in the connec-
tions’s context menu.
or
R Press the illuminated "Hold" key. (The "Hold" sensor key
must be configured Æ page 61.)
Using line keys
On multi-line telephones you can use the line keys to
place ongoing calls on hold.
R Press the corresponding line key. The line key LED
starts flickering. The call is now on hold.
Retrieving a held call:
T Press the corresponding line key. The line key LED
lights up. The call is retrieved.
Hold ?
f
Reconnect ? l
The LED display Æ page 21 indicates that the
call is on hold to other multi-line telephones
where this line is also configured. These phones
can then pick up the call.