Making Calls – Basic Functions
19
Step by Step
Station fixed forwarding
If you have programmed a forwarding destination for
station fixed forwarding, you can activate and deacti-
vate the forwarding facility either in the program/service
menu or with a forwarding key configured by your ser-
vice personnel. The programmed forwarding destina-
tion remains valid until you change or delete it.
Programming/changing a forwarding destination
Press the key. The lamp lights up.
: Confirm.
: Confirm. Display shows "Station variable forwarding".
: Confirm. Display shows "Station fixed forwarding". If for-
warding has been programmed the destination is dis-
played.
> Start "Station fixed forwarding".
p Enter the number of the forwarding destination. Any
destination previously saved will be overwritten.
: Confirm when the complete number has been entered.
Activating/deactivating station fixed forwarding
You can only activate station fixed forwarding if a desti-
nation number has been programmed.
Press the key. The lamp lights up.
: Confirm.
: Confirm. Display shows "Station variable forwarding".
: Confirm. Display shows "Station fixed forwarding". If for-
warding has been programmed the destination is dis-
played, whether forwarding is switched on or off.
: Start "Station fixed forwarding".
> : Select and confirm. Station fixed forwarding is activated.
Output in first line. The following display message ap-
pears in the idle menu:
Forward to
for example, 2223 Klaus Meier (own number).
or
> : Select and confirm. Station fixed forwarding is deacti-
vated.
Output on first line display.
program/service
Destinations?
Call forwarding?
Next forwarding type? >
Next forwarding type? >
Enter destination: >
Save?
program/service
Destinations?
Call forwarding?
Next forwarding type? >
22805 Eric Brown>
Activate?
Fixed forwarding on
Deactivate?
Fixed forwarding off
To Next Page
Loading...
