Making Calls – Basic Functions
21
Step by Step
Station variable forwarding
With station variable forwarding you can choose be-
tween 6 different types of call forwarding:
• Station variable unconditional/all forwarding
– forwarding for internal calls only
– forwarding for external calls only
– forwarding for both internal and external calls
• Forwarding for busy (int/ext)
• Forwarding after no answer (int/ext)
• Forwarding for busy and ring no answer
The forwarding types are mutually exclusive except for
forwarding for internal and forwarding for external. You
can program a forwarding destination for both of the
two exceptions and thus activate them both.
Example:
You had activated station variable forwarding. You now
program and thus activate forwarding after timeout. Sta-
tion variable forwarding is automatically deactivated and
its forwarding destination is deleted.
Selection of a station variable forwarding type
Select the items Destinations and Forwarding in the
Service Menu.
Press the key. The lamp lights up.
: Confirm.
: Confirm.
"Station variable forwarding" will be offered first.
Output on first line display.
Output on second line display.
: Confirm to select the next forwarding type.
Output on first line display.
Output on second line display.
or If you have already programmed a station fixed forward-
ing destination.
Output on first line display.
Output on second line display.
: Confirm to select the next station variable forwarding
type
Output on first line display.
Output on second line display.
program/service
Destinations?
Call forwarding?
FWD-ALL-BOTH off
Next forwarding type? >
Fixed forwarding off
Next forwarding type? >
Fixed forwarding off
22805 Eric Brown>
FWD-ALL-INT off
Next forwarding type? >
To Next Page
Loading...
