Alphabetical Reference
91
System Type
• Select the type of communication platform used here (read only).
• Base
• Standby
Page 26 Page 65 Page 65
Terminal IP Address
• Enter the IP Address for the optiPoint 410/420 here, provided that
no DHCP server assigns this value dynamically ( DHCP).
• If the value was assigned dynamically, it can only be read.
• A restart is necessary after the change.
• Default value Page 109.
• IP editor on optiPoint 410/420 Page 106.
Page 22 Page 18 Page 62
Ter m in al M as k
• Enter the Subnet Mask for the optiPoint 410/420 here, provided that
no DHCP server assigns this value dynamically ( DHCP).
• If the value was assigned dynamically, it can only be read.
• A restart is necessary after the change.
• Default value Page 109.
Page 22 Page 18 Page 62
Time Source
• In this field, you specify how time is updated on your telephone.
Page 67
Time Window
• Messages sent by the gateway will be accepted only within this
defined time window.
• Operation, max.: 180 minutes
Page 65
Timezone offset
• This entry is only required if you selected "SNTP" in the Time Source
field.
• Enter the time difference (in seconds) between your time zone and
Greenwich Mean Time (GMT). Example for Germany: + 3600.
Page 67
System All settings are transferred from the system ( DHCP).
SNTP Enter the following parameters manually:
Default SNTP IP, Timezone offset, Daylight Saving
To Next Page
Loading...
