Siemens POS8.4420/109 - Standby Page

Operation
Standby page
8
30 | 32
Siemens
A6V11471220_en--_a
Smart Infrastructure
2018-11-30
Button 1
Press to exit and save the settings
Buttons 2 and 6
Press to select a setting
Buttons 3 and 7
Toggle through the parameters
Buttons 4, 5 and 8
No function (no arrow symbols displayed)
From the default page, long-press buttons 6 and 8 simultaneously to enter the
expert settings page:
Button 1
Press to exit and save the settings
Buttons 2 and 6
Press to select a setting
Buttons 3 and 7
Toggle through the parameters
Buttons 4, 5 and 8
No function (no arrow symbols displayed)
For detailed information about the parameters, refer to Parameters [➙ 31].
8.8 Standby page
When no operation occurs on the screen for a while, the room operator units turns
off backlighting and displays the standby page automatically. There are 5 types of
standby pages. Users can select from the standard settings P02.
Press any button to activate backlighting and any button again to enter the default
page.
Expert settings