Siemens PowerLink 100 User Manual

[scdeport-260313-01.tif, 1, en_US]
Figure 7-2 SWT 3000 PU4 USB to UART Bridge Controller
i
i
NOTE
The COM-port of the USB to UART Bridge controller is only displayed in the Windows Device manager or
the Options > Connection dialog of PowerSys, if PC and SWT 3000 are connected by the USB cable
supplied with the device. The power supply of the SWT 3000 can be switched ON or OFF.
With the PowerSys software, the SWTStraps program is also delivered. The program is useful to carry out the
jumper settings for the SWT 3000 as well as iSWT modules. You can find the SWTStraps program on the
PowerSys DVD.
Service Program PowerSys
7.3 Installation of the Service Program PowerSys
Smart Communications, PowerLink 100 and PowerLink 50, Product Information 53
E50405-U53-X-B3-7670, Edition 11.2014

Siemens PowerLink 100 Specifications

General

Brand	Siemens
Model	PowerLink 100
Category	Portable Generator
Language	English