Siemens Profiset 30isdn - Step 5: Setting the National Variants; Step 6 (PBX Operation Only): Program the Trunk Code

Putting the telephone into operation
5
kap01.fm5
27.11.98
Profiset 30isdn engl.: A30853-X300-B107-1-7619
Step 5: Setting the national variants
This setting takes account of specific national features of
the ISDN network:
Step 6 (PBX operation only): Program the trunk code
If you are operating your Profiset 30isdn at a telecommu-
nications system (private branch exchange), you must pro-
gram a trunk code in accordance with the configuration of
the system (trunk code, max. 2 digits ➔ page 31) :
It is not necessary to enter MSNs 2 and 3.
MSNs can be entered at any time (➔ page 31).
Please note htat the first MSN is also called glo-
bal call number in Austria.
If more than one MSN is entered, take care that
this global call number will not be used. Other-
wise all untis connected to his So bus will be
called.
a
Handset is on-hook
S
19
T
Enter the national variant,
e.g. “43“ for Austria
Your Profiset 30isdn is preset to the national variant “49”
for Germany. (For further national variants ➔ page 32.)
S
The setting of the national variant is completed.
00.00.00 00:00
P
1949_
P
1943_
a
Handset is on-hook
S
24
T
Enter the trunk code e.g. “0“
S
The programming of the trunk code is completed.
00.00.00 00:00
P
24_
P
240_
You can cancel a programming procedure
without making any changes by pressing the
Disconnect key h!