Programming the telephone settings
29
kap01.fm5
27.11.98
Profiset 30isdn engl.: A30853-X300-B107-1-7619
Ringer volume
You can set the volume of the call signal to four levels
(1...4: 1=very low, 4=very loud). The volume is preset to
level 2. If the volume is set to level 0, the call signal is de-
activated (do not disturb). You can set the volume via the
digit keys or the +/- keys.
Ringer melody
A specific ringer melody can be set for each of the three
MSN. There are four different melodies.
The presettings are:
for MSN 1 melody 1,
for MSN 2 melody 2,
for MSN 3 melody 3.
Set the ringer melody for each MSN in accordance with
the above procedure.
If you enter an incorrect password, the program-
ming procedure will be immediately cancelled.
If you have forgotten your password, please
contact your dealer.
a
Handset is on-hook.
S21
Start the programming procedure.
1 ... 4
Press one of the keys 1 ... 4.
or
+ / -
Change the volume step by step via the +/- key.
or
0
Deactivate the call signal by pressing “0“.
S
Save the setting.
a
Handset is on-hook.
S22
Start the programming procedure.
1 ... 3
Select MSN 1, 2 or 3.
1 ... 4
Press one of the keys 1 ... 4 to select a ringer melody.
S
Save the setting.
To Next Page
Loading...
