Siemens Profiset 30isdn - Activating;Deactivating the Display of Charge;Call Time of the Last Outgoing Call

Programming the telephone settings
36
kap01.fm5
27.11.98
Profiset 30isdn engl.: A30853-X300-B107-1-7619
Activating/deactivating the display of charge/call time of the last outgoing
call
The charge and call time for the last outgoing call (if it is
activated) are displayed for approx. 10 seconds after the
handset has been lifted and replaced.
Enter 0 or 1 to deactivate or activate the display of charge:
● “0“ Display of charge /call time of the last outgoing
call is deactivated
● “1“ Display of charge /call time of the last outgoing
call is activated
In the as-supplied condition, the display of charge/call
time of th last outgoing call is activated.
T
Enter the password if necessary.
0 or 1
Press key 0 or 1.
S
Save the setting.
a
Handset is on-hook.
S17
Start the programming procedure.
T
Enter the password if necessary.
0 or 1
Press key 0 or 1.
S
Save the setting.
There may be differences between the device’s
meter and the charge meter of the switching
centre. The charge meter of the network opera-
tor is definitive for the telephone bill.