Siemens Profiset 30isdn - Programming keys on the telephone; Programming the destination dialling keys

Programming keys on the telephone
26
kap01.fm5
27.11.98
Profiset 30isdn engl.: A30853-X300-B107-1-7619
If you press the Number redial key, you can also program
another Speed dialling key without having to exit the pro-
gramming procedure.
Programming direct station selection (babyphone)
You can program “direct station selection“ in your Profiset
30isdn. The direct station selection number is automati-
cally dialled by pressing any key on the keypad (if the tel-
ephone is locked with direct station selection and the
handset is lifted). Your child can use direct station selec-
tion (baby phone) for example, to contact you if when you
are with friends.
a
Handset is on-hook.
S11
Start the programming procedure.
T
Enter the password if necessary.
T
Press one of the digit keys.
T
Enter the call number.
W
Press the Number redial key in order to be able to pro-
gram another Speed dialling key with a call number.
T
Press another digit key.
T
Enter the call number.
S
Speed dialling numbers are stored.
a
Handset is on-hook.
S12
Start the programming procedure.
T
Enter the password if necessary.
T
Enter the direct station selection number.
S
The direct station selection number is stored.
The direct station selection number is only
dialled if the telephone is locked (➔ page 19)
and a direct station selection number has been
programmed.