Siemens QAA58 series - Checking the RF Components

2
Mounting and installation
RF components
36
Siemens Operator / Room / Auxiliary devices CE1U2358en_04
Building Technologies 2014-09-26
2.2.7 Checking the RF components
To check required RF components, go to the "RF" operating page, operating lines
130 to 132 and 134 to 137.
Via the operating level "Commissioning".
In the aforementioned operating lines, you can see whether the desired room units,
operator units and RF repeaters (as applicable) are operations or not (or no
reception).
The final check of the RF components is conducted using an operator or roo
m
unit featuring operating line display (not QAA5x).