56
Siemens Operator / Room / Auxiliary devices CE1U2358en_04
Building Technologies 2014-09-26
3.2.3 User levels
The user levels only allow authorized user groups to make settings. To reach the
required user level, proceed as follows:
Operation Display example Description
1 Basic display.
If the basic display is not shown, press the
ESC button to go back.
Press OK.
2 You are on user level
Enduser
.
Long press of the INFO button (> 3 Seconds).
3 You are now given a choice of user levels.
Turn the setting knob until the required user
level is reached.
Press OK.
To Next Page
Loading...
Need help?
General
