38
Siemens Operator / Room / Auxiliary devices CE1U2358en_04
Building Technologies 2014-09-26
Displays all segments:
Example of basic display:
The display has the following meaning:
Heating to Comfort setpoint Error messages
Heating to the Reduced set point
Burner in operation (oil/gas
burner).
This button is used to switch between the different operating modes.
The selection is displayed by a bar below the heating mode symbol.
Automatic operation
In automatic mode the room temperate is controlled as per the scheduler.
Characteristics of automatic mode:
l Heating mode according to the time program
l Room setpoints per the heating program "Comfort setpoint"
or "Reduced
setpoint"
l Protective functions active.
l Automatic summer / winter changeover and automatic 24-hour heating limit
active (ECO functions)
Display
Explanation
Selecting pace heating
mode
To Next Page
Loading...
