51
Siemens Graphical User Interface UI400 CE1U2348en
Building Technologies 2014-06-03
Enter settings
l Select ventilation page (
) on the navigation bar.
The living zone cannot be selected or edited, if the room or operator unit is
assigned to only one living zone or jointly operates all assigned living zones.
To change living zones, proceed in the manner as described for the temperature
page.
Settings:
l Off: Ventilation is switched off.
l Automatic: The living zone is controlled as per the time switch program.
l Stage 1 to Stage 3: Ventilation is continuously operated at the set stage.
The operating mode can be individually set per living zone.
It is easier to use the plant/zone switch on the start page if you want to operate
the entire building in automatic mode.
To change operating mode, proceed in the manner as described for the
temperature page.
Prerequisites
Change living zone
Set operating mode
To Next Page
Loading...
