Siemens QMX3.P02 User Manual

CM2N1602en_07
2017
-05-22
Building Technologies
s
1
602
QMX3.P37 QMX3.P34 / P74 QMX3.P02 QMX3.P70 QMX3.P30 / P40
Desigo™ TRA
QMX3.P30
Q
MX3.P40
QMX3.P70
QMX3.P02
QMX3.P34
QMX3.P74
QMX3.P37
Wall-mounted sensors and room
operator units for KNX
PL-Link,
KNX S
-mode and KNX LTE-Mode
Communicative sensors, switches and room operator units with KNX (S-mode,
LTE-Mode) or KNX PL-Link (for Desigo™ Total Room Automation)
Functions (depending on type):
• Energy efficiency function ("Green Leaf
")
• Room temperature, CO
2
, and humidity measurement
• Control of light, blinds, and scenes
• PID controller for room temperature or ventilation (KNX S-mode)
• LCD Display for room temperature, operating mode, etc.
• Label for light, blinds and scenes (exchangeable, created with Word
template)
• Operation via 8 or 16 touchkeys
• Interface KNX (S-mode, LTE-Mode) and KNX PL-Link(for TRA, with plug &
play functionality)
• Powered over KNX PL-Link / KNX bus
• LEDs to indicate the switch state or the position of the device in dark rooms

Siemens QMX3.P02 Specifications

General

Brand	Siemens
Model	QMX3.P02
Category	Accessories
Language	English

Summary

Use and Compatibility

Compatibility with KNX PL-Link

Details on how room operator units function with KNX PL-Link, including measurements and operation.

Compatibility with KNX S-mode

Details on how room operator units function with KNX S-mode, including measurements and control.

Engineering and Commissioning

KNX PL-Link Engineering and Commissioning

Information on plug & play functionality, wiring, and installation of KNX PL-Link devices.

KNX S-mode Engineering and Commissioning

Details on engineering and commissioning using the ETS tool for KNX S-mode.

KNX LTE-Mode Engineering and Commissioning

Details on engineering and commissioning using the ACS tool for KNX LTE-Mode.

Mounting and Installation Procedures

Installation and Safety Guidelines

KNX PL-Link Wiring and Connections

Information on KNX PL-Link wiring, cable usage, and terminal identification.

Commissioning Procedures

Prerequisites for KNX PL-Link Commissioning

Ensuring the room automation station is running and applications are loaded.

Manual Commissioning (KNX PL-Link)

Step-by-step guide for manual commissioning via room automation station.

KNX PL-Link Connection Test

Reset to Factory Settings (KNX PL-Link)

Operation to reset the device to factory default settings.

Commissioning without Display

Addressing (KNX PL-Link, no display)

Connection Test (KNX PL-Link, no display)

Reset to Factory Setting (KNX PL-Link, no display)

Factory reset for devices without a display.

Plug & Play Commissioning (KNX PL-Link)

Automatic Communication Establishment

Individual Address Download

Commissioning and Operation (KNX)

Addressing (KNX)

Reset to Factory Setting (KNX)

Factory reset for KNX devices, irreversible operation.

Display Elements and Key Functions

Function of Display Elements and Keys

Detailed explanation of icons, symbols, and key operations.

Green Leaf Function

Setpoint and Fan Speed Adjustment

Maintenance and Technical Data

Technical Data: Supply Voltage

Technical Data: Temperature Sensor

Technical Data: Humidity and CO2 Sensors

Specifications for relative humidity and CO2 sensors, including accuracy.

Notes on CO2 Sensor Functionality

Product Specifications and Compliance

Ports, Interfaces, and Cable Specifications

Standards, Directives, and Compliance

FCC Compliance Rules and Warning

Connection Details

KNX / PL-Link Plug Wiring

Information on KNX PL-Link plug connections and wire interchangeability.

Tool Plug and RJ45 Cable Pinout

Connecting the ABT Tool

Instructions for connecting the ABT to the room automation station or room unit.