Model Designation SDQLCAI-1
5-2 May 2002
5.2 Accessories
Table 5-2 lists the available CAI accessories.
Table 5–2 CAI Accessories
PART NUMBER DESCRIPTION
16114-97 Marshalling Utility Panel (see Figure 2-2) — Features mounted wire ducts and
DIN rails for Marshalled Termination Assemblies. It is intended for installation
in a MODULPAC cabinet.
16114-12
Blank Utility Panel (see Figure 2-2) — This panel is similar to that above but
without installed ducts and rails. It is intended for installation in a MODULPAC
cabinet. It has the same dimensions as the Marshalling Utility Panel.
16056-562 (single
piece number)
Mounting Ear (see Figure 2-8) — Provides for a flat mounting of the SAM (CAI)
Marshalled Termination Assembly. Four pieces required. Refer to section 2.6.2.
16056-468
End Stop Kit. End Stops prevent the sliding of a (CAI/SAI) Marshalled
Termination Assembly along the DIN mounting rail.
To Next Page
Loading...
