Siemens QUADLOG - Page 52

Specifications SDQLCAI-1
6-2 May 2002
SPECIFICATIONS DATA REFERENCE STANDARDS
Vibration 10-150 Hz
2 g. max
IEC 68-2-6 Test F
c
Mechanical Shock:
Acceleration
Duration
15 g11 ms IEC 68-2-27 Test E
A
Corrosives Class GX ANSI / ISA S71.04
Radiated Emission, E-Field 30 MHz to 230 MHz
30 db (uV/m) at 30 m
230 MHz to1000 MHz
37 db (uV/m) at 30 m
0.15 to 0.3 MHz
80 to 50 db (uV/m) at 10 m
0.3 to 30 MHz
50 to 34 db (uV/m) at 10 m
30 to 1000 MHz
54 db (uV/m) at 10 m
EN 55011, EN 50081-2
CISPIR 16
Conducted Emission Power Lines 0.15 MHz to 0.5 MHz
79 dBm quasi-peak
0.5 MHz-30 MHz
73 dBm quasi-peak
10 to 150 kHz
96 to 52 dBuV
150 to 350 kHz
60 to 52 dBuV
350 kHz to 30 MHz
52 dBuV
EN 55011, EN 50081-2
CISPIR 16
Immunity,
ConductedElectromagnetic Field
150 KHz-80 MHz, 10 V
10 k Hz-80 MHz, 3V
EN61000-4-6
Immunity, Power Line Surge 4 kV EN61000-4-5
Immunity, Signal Line Surge 2 kV EN61000-4-5
Immunity, Electrical Fast
Transients
4 kV Power Lines, 2 kV I/O EN61000-4-4
Immunity, Radiated E-Field 10 V/m, 80 kHz-1000 MHz EN61000-4-3
Immunity, Electrostatic Discharge 8 kV contact, 15 kV air EN61000-4-2
Altitude Up to 2000 meters IEC 1131-2
Installation/Overvoltage Category II IEC 664
Pollution Degree 2 IEC 664