● KNX bus (terminals CE+ and CE-) for communication with Synco devices or
KNX compatible devices
● M/S - manager/subordinate function via LTE-Mode or S-Mode to synchronize
equipment and save energy in open spaces
● M/S - manager/subordinate alarm management via LTE-Mode allowing for
subordinate alarm display on the manager
● Display of outside temperature, humidity, CO
2,
or time of day from KNX bus
● Time scheduling and central control of setpoints from KNX bus
● Control of Economy setpoints via KNX bus
● Relative humidity setpoint via KNX bus
● Control of KNX actuators and fan via S-Mode objects
● Energy supply optimization via energy demand signal via Synco RMB795B
central control unit
● Interworking with Siemens AQR.. and QMX.. sensors for room humidity, room
temperature and CO
2
measurement
● Interworking with Siemens QMX.. room operator units for room humidity, room
temperature and operating commands for fan, operating mode and setpoints
● Commissioning KNX area, line and device address via mobile application PCT
Go
To Next Page
Loading...
Need help?
General
