1.3.3 Quality assurance
This document is prepared with great care.
● The contents of this document are checked at regular intervals.
● Any corrections necessary are included in subsequent versions.
● Documents are automatically amended as a consequence of modifications and
corrections to the products described.
Please make sure that you are aware of the latest document revision date.
If you find lack of clarity while using this document, or if you have any criticisms or
suggestions, please contact the Product Manager in your nearest branch office.
The addresses of the Siemens Regional Companies are available at
www.buildingtechnologies.siemens.com.
1.3.4 Document user/request to the reader
Before using products from Siemens Industry, Inc., it is important that you read the
documents supplied with or ordered at the same time as the products (equipment,
applications, tools, and so on) carefully and in full.
We assume that persons using our products and documents are authorized and
trained appropriately and have the technical knowledge required to use our
products as intended.
More information on the products and applications is available:
● On the intranet (Siemens employees only) at
https://wse04.siemens.com/content/P0002723/SitePages/Home.aspx
● From the Siemens branch office near you
www.buildingtechnologies.siemens.com or from your system supplier
● From the support team at headquarters fieldsupport-zug.ch.sbt@siemens.com
if there is no local point of contact
Siemens assumes no liability to the extent allowed under the law for any losses
resulting from a failure to comply with the aforementioned points or for the
improper compliance of the same.
1.4 Target audience, prerequisites
This document assumes that users of the RDG2..KN room thermostats are familiar
with the ETS tool, Synco ACS tool or both and can use them.
It is also assumed that these users are aware of the specific conditions associated
with KNX.
In most countries, specific KNX know-how is conveyed through training centers
certified by the KNX Association (see www.knx.org/).
For reference documentation, see Reference documents [➙ 5].
To Next Page
Loading...
Need help?
General
