5 Supported KNX tools
5.1 ETS
ETS is an engineering tool to fully commission RDG2..KN room thermostats.
ETS can implement the following functions:
● Define and download the physical address
● Define and download the application (plant type, control sequence)
− For partial download, make sure application should be same with
specific DIP switch setting
● Set up and download thermostat control parameters
● Set up and download group addresses
This document does not describe how to operate ETS and set up a device. Refer
to the KNX Manual [5] [➙ 5] for more details.
ETS can be updated online.
To Next Page
Loading...
Need help?
General
