Siemens RDG2 KN Series Basic Documentation

Notes
Operation
3
A6V11545892_en--_c
23 | 180
User action
Effect, description
Press left button (P002 = 3 and P009 = 1)
Toggle between °C and °F (for details, see display in
Temperature control [➙ 26])
Press left button while "Operating mode" via bus is
Economy
Activate "Extend Comfort mode"
(for details, see Different ways to influence operating
mode [➙ 32]).
Keep left button pressed and turn rotary knob
clockwise/counter-clockwise
Activate timer "Extend presence"/"Extend absence" and
set the time (for details, see Different ways to influence
operating mode [➙ 32].
Press right button >3 seconds
Activate/deactivate button lock.
Press right button for fan coil unit
Change fan mode.
Turn rotary knob
Adjust the room temperature Comfort setpoint.
Press left and right buttons simultaneously for 3
seconds. Release and within 2 seconds, press the
right button again until P001 is displayed
Enter parameter setting mode "Service level".
Press left and right button for 3 seconds, release,
press left button for 2 seconds until the temperature
disappears, then turn rotary knob counterclockwise
min. ½ revolution
Enter parameter setting mode "Expert level",
diagnostics and test.
Press left and right button simultaneously for 6
seconds
Enter (KNX) programming mode.
Press the middle button once and turn rotary knob
Enter programming mode PROG, TIME, DATE or
AWAY.
Display

Siemens RDG2 KN Series Specifications

General

Brand	Siemens
Model	RDG2 KN Series
Category	Thermostat
Language	English