EasyManua.ls Logo

Siemens REV23.03RF - Page 2

Siemens REV23.03RF
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2/17
Building Technologies Raumtemperaturregler REV23.03RF CE1N2265en
HVAC Products 22.02.2006
• Solenoid valves of atmospheric gas burners
• Forced draft gas or oil burners
• Circulating pumps of heating systems, zone valves
• Electric direct heating systems or fans of electric storage heaters
• Thermal actuators
• Cooling and refrigeration equipment
Functions
• Radio signal transmission
• PID control with self-learning or selectable switching cycle
• 2-position control
• Automatic mode with 7-day switching program for 24-hour, working day, weekend or
7-day operation with up to 3 heating or cooling periods per day
• Each heating or cooling period has its own temperature setpoint
• One 24-hour operating mode with one heating or cooling period
• Override button
• Sensor calibration and reset function
• Frost protection or overtemperature protection
• Limitation of the minimum setpoint
• Holiday mode
• Heating or cooling mode
• Periodic pump run
• Optimum start control with the first heating period
Type summary
Radio signal equipment consisting of:
Room temperature controller (transmitter), receiver (switching unit)
and support
REV23RF/SET
Room temperature controller (transmitter) and support
REV23.03RF
Receiver (switching unit)
REV-R.03/1
Ordering
When ordering, please give the type references according to «Type summary».
The controller / transmitter REV23.03RF is supplied complete with batteries.
Technical design
Display and
operating elements
Siemens REV23.03RF - Page 2