Siemens RUGGEDCOM RSG907R Installation Guide

RUGGEDCOM RSG907R
Installation Guide
Chapter 5
Technical Specifications
Power Supply Specifications 29
Technical Specifications
This section provides important technical specifications related to the device.
CONTENTS
• Section5.1, “Power Supply Specifications”
• Section5.2, “Failsafe Alarm Relay Specifications”
• Section5.3, “Supported Networking Standards”
• Section5.4, “Fiber Optic Ethernet Port Specifications”
• Section5.5, “Operating Environment”
• Section5.6, “Mechanical Specifications”
• Section5.7, “Dimension Drawings”
Section5.1
Power Supply Specifications
NOTE
When determining cable lengths, make sure the minimum input voltage for the power supply is
provided at the power source.
Hazardous Environments
Input Voltage
Power
Supply Type
Minimum Maximum Nominal
Internal
Fuse Rating
Isolation
Maximum Power
Consumption
a
LO 11.1 VDC 55 VDC
12 VDC, 24
VDC, 48 VDC
5 A 1.5 kVDC 13.4 W
100 VDC 270 VDC
125 VDC,
250 VDC
3.15 A 5 kVDC 15.3 W
HI
100 VAC 240 VAC
110 VAC,
220 VAC
3.15 A 5 kVDC 15.5 W
a
Current consumption may vary based on configuration.

Siemens RUGGEDCOM RSG907R Specifications

General

Brand	Siemens
Model	RUGGEDCOM RSG907R
Category	Switch
Language	English