159/218
Siemens Building Technologies Basic Documentation RVA63.242, RVA53.242 CE1P2373E
Landis & Staefa Division Description of OEM settings 26.03.2001
5.10 Control of boiler pump
Boiler pump control mode can be selected.
The setting defines the criteria according to which the boiler pump shall be operated.
Setting range Unit Factory setting
0 / 1 – 0
The settings have the following meaning:
0 The boiler pump operates when there is a demand for heat.
In that case, the boiler pump responds to locking signals.
1 The boiler pump operates when there is a demand for heat or when the burner
operates. In that case, the boiler pump does not respond to locking signals
(protective boiler start-up).
Benefit
Description
Setting
Effect
To Next Page
Loading...
