Siemens S120_EN_rev06-08062017.docx 8-9
6. Select the drive from the left screen and then press the button “Upload to CPU
PC” to transfer the
configuration and the program from the inverter to programming PC.
Figure 41 – STARTER transferring inverter configuration into PC
7. Confirm the screen know how protection activated, so that the loading happens to the PC.
Figure 42 – transferring confirmation with know how protection activated
8. At the end of the loading on the left side of the screen, the drive will be named S120..and will appear
numerous other items including DRIVE.
To Next Page
Loading...
