Approvals
10.3 General approvals
SCALANCE S615
76 Operating Instructions, 10/2022, C79000-G8976-C389-07
10.3 General approvals
ATEX, IECEx, UKEX and CCC Ex certification
Risk of explosion in hazardous areas
When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that the
associated conditions in the following document are adhered to:
"SIMATIC NET Product Information Use of subassemblies/modules in a Zone 2 Hazardous
Area".
You will find this document
• on the data medium that ships with some devices.
• on the Internet pages under Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/view/78381013).
Enter the document identification number "C234" as the search term.
The markings of the electrical devices are:
II 3 G Ex ec IIC T4 Gc
DEKRA 18ATEX0025 X
Importer UK:
Siemens plc,
(Ex na IIC T4 Gc, not on the nameplate)
The products meet the requirements of the following standards:
• EN/IEC 60079-7, GB 3836.8
• EN IEC/IEC 60079-0, GB 3836.1
You will find the current versions of the standards in the currently valid certificates.
Note for Australia - RCM
The product meets the requirements of the RCM standard.
Applied standards:
• EN 61000-6-4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards -
Emission standard for industrial environments
To Next Page
Loading...
Need help?
General
