Description of the device
3.8 SET button
SCALANCE S615
28 Operating Instructions, 10/2022, C79000-G8976-C389-07
3.8 SET button
Position
The SET button is on the front of the housing.
Function
The SET button has the following functions:
• Restarting the device
To restart the device, press the SET button briefly.
Note
If you make changes to the configuration and restart immediately afterwards with the SET
button, the changes may be lost. If you restart the device using the WBM (menu
command "System > Restart") or using the CLI (command "restart" in the Privileged EXEC
Modus), the configuration changes are always retained.
To Next Page
Loading...
